Excavators are more and more widely used in production activities, especially in large construction sites. In the process of using excavators, we will find that the water temperature of excavators is too high, so how can we check out the high water temperature of excavators? This is what we want to introduce today, let's follow the digging, machine gear parts operators behind to see!
On the one hand: First of all, we should check whether the coolant of the excavator starter is enough. If it is found that it is not enough, we should immediately respond to the relevant personnel to increase the coolant. Then check whether the temperature thermostat of the excavator is damaged. If there is damage, it should be repaired immediately. Check whether the belt of the electrical fan is loose and whether the fan speed is too low.
On the other hand: in the process of use, we often find that the excavator belt will be loose, and once found, it should be adjusted immediately. Check the water circulation of excavator pump together. Then see if there are bubbles, combined with the operation time of the excavator, identify whether the initiating mechanical and electrical devices are overloaded for a long time. After cleaning up the above reasons, it is the excavator water temperature that is too high caused by the internal mechanical failure of the initiator.